Specials
BNC to Alligator Y Splice Oscilloscope Test Probe [box]
R82.00 R65.00
Li-ion 18650 14.8V 4000mAh Battery Pack
R487.50 R365.63
LM3914N Bar Graph Display Driver DIP18 [D09]
R24.00 R18.00
Raspberry Pi 3 Model B Development Board
R765.00 R665.00
Raspberry Pi 3 Model B+ Development Board
R799.95 R699.00
Raspberry Pi Zero WIFI Development Board
R264.95 R244.95
SD Card Reader Micro Module SPI interface [8Pxx]
R39.92 R35.93
Voltmeter Ammeter 100V 10A LED (built-in shunt)
R164.95 R140.21
                  

EEPROM DS2433 4kbit 1-Wire SOP8 SMD

EEPROM DS2433 4kbit 1-Wire SOP8 SMD
Categories: Components  Intgr. Circuits 
Product Code: ds2433
Views: 8
Availability: 5
Price: R23.18
Qty:     - OR -   Add to Wish List
Add to Compare

 

The DS2433 4Kb 1-Wire® EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for example a single port pin of a microcontroller. The DS2433 consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (23h) plus 4096 bits of user-programmable EEPROM. The power to read and write the DS2433 is derived entirely from the 1-Wire communication line. The memory is organized as sixteen pages of 256 bits each. The scratchpad is an additional page that acts as a buffer when writing to memory. Data is first written to the scratchpad where it may be read back for verification. A copy scratchpad command will then transfer the data to memory. This process insures data integrity when modifying the memory. The 64-bit registration number provides a guaranteed unique identity which allows for absolute traceability and acts as node address if multiple DS2433s are connected in parallel to form a local network. Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The PR-35 and SO packages provide a compact enclosure that allows standard assembly equipment to handle the device easily for attachment to printed circuit boards or wiring. Typical applications include storage of calibration constants, board identification and product revision status.

Key Features

  • 4096 Bits Electrically Erasable Programmable Read-Only Memory (EEPROM)
  • Unique, Factory-Lasered and Tested 64-Bit Registration Number (8-Bit Family Code + 48-Bit Serial Number + 8-Bit CRC Tester) Assures Absolute Identity Because No Two Parts Are Alike
  • Built-In Multidrop Controller Ensures Compatibility with Other MicroLAN Products
  • Memory Partitioned Into Sixteen 256-Bit Pages for Packetizing Data
  • 256-Bit Scratchpad with Strict Read/Write Protocols Ensures Integrity of Data Transfer
  • Reduces Control, Address, Data, and Power to a Single Data Pin
  • Directly Connects to a Single Port Pin of a Microprocessor and Communicates at Up to 16.3kbps
  • Overdrive Mode Boosts Communication Speed to 142kbps
  • 8-Bit Family Code Specifies DS2433 Communication Requirements to Reader
  • Presence Detector Acknowledges When Reader First Applies Voltage
  • Low-Cost PR-35, SFN, Flip Chip, or 8-Pin SO Surface-Mount Packages
  • Reads and Writes Over a Wide Voltage Range of 2.8V to 6.0V from -40°C to +85°C

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Visitor Counter
01191612
Today Visitors 43
Total Visitors 101059
Today Hits 375
Total Hits 1191612
Online Visitors 5